SCS 770102, Smock, Dual-Wire, Jacket, Blue, Knitted Cuffs, 3 Pockets, No Collar, M SCS

SCS 770102, Smock, Dual-Wire, Jacket, Blue, Knitted Cuffs, 3 Pockets, No Collar, M

The SCS Dual-Wire Static Control Smock is designed for use with dual-wire grounding systems. One conductive cuff is electrically bonded to the dissipative garment and one snap stud at the hip. The second conductive cuff uses an isolated conductive path to bond to a second snap stud at the hip. The smock’s dual-wire circuit loop closes when its two conductive cuffs are bridged by the skin on the wearer’s wrists.

The SCS Dual-Wire Static Control Smock creates a Faraday cage around the torso and arms of the wearer and protects ESD susceptible items from the electrostatic fields generated by the wearer’s clothing. SCS Dual-Wire Static Control Smocks meet the requirement for Groundable Static Control Garment System per ANSI/ESD S20.20 required limit of < 3.5 x 10⁷ ohms Rtg tested per ANSI/ESD STM2.1 and ESD TR53. The path-to-ground integrity of the SCS Dual-Wire Static Control Smock can be verified with constant monitors or personnel grounding testers.

• Groundable Static Control Garment System Meets ANSI/ESD S20.20 (Rtg < 3.5 X 10⁷ ohms) Requirement Tested Per ANSI/ESD STM2.1 and ESD TR53
  Allows operators and smock to be bonded or electrically connected to remove electrostatic charges to ground to limit ESD events in ESD Protected Areas
• Compatible with the SCS 724 Workstation Monitor and Other Dual-Wire Continuous Monitors
  Pairs with the SCS 770110 and 770111 MagSnap® Dual-Wire Coil Cords (sold separately)
• Minimum of 9% Carbon Conductive Nylon Fibers Woven in Chain-Link Design
  Provides continuous and consistent charge dissipation throughout lifetime of smock
• Creates Faraday Cage Effect Around Torso and Arms of Operator
  Shields ESD charges on operators’ clothing from damaging ESD sensitive items
• Panel-To-Panel Conductivity
  Prevents isolated charged conductor in ESD Protected Area
• Hip-To-Cuff Grounding
  Improves productivity, grounds operator with no need for a cord to be attached to the operator’s wrist.
• Jacket Length with “Set-In” Style Sleeves, Reinforced Hem V-Neck and Stainless-Steel Snaps
  Provides durable, tailored quality
• Tag-Free Neck Label
  Sizing and laundering information sublimated on the inside of the back collar
• 3 Pockets
  1 chest pocket and 2 hip pockets
• Made in the United States of America
  This item is made and stocked in Miami, FL.
• TB-9085 – Dual-Wire Static Control Smock User Guide